Skip to main content
Call us at +1-800-604-9114 for more information about our products or contact us online Need help? +1-800-604-9114 or contact us
product-image-AAA19183_WB.jpg WB (Western Blot) (Figure 1. Western blot analysis of GSTP1 using anti-GSTP1 antibody (AAA19183).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-GSTP1 antigen affinity purified polyclonal antibody at 0.5 ug/mL overnight at 4°C, then washed with TBS-0.1% Tween 3 times with 5 minutes each and probed with a goat anti-Rabbit IgG IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for GSTP1.)

Rabbit GST3/GSTP1 Monoclonal Antibody | anti-GST3 antibody

Anti-GST3/GSTP1 Monoclonal Antibody

Gene Names
GSTP1; PI; DFN7; GST3; GSTP; FAEES3; HEL-S-22
Reactivity
Human, Mouse, Rat
Applications
Immunocytochemistry, Immunofluorescence, Immunohistochemistry, Western Blot
Purity
Affinity-Chromatography
Synonyms
GST3/GSTP1, Antibody; Anti-GST3/GSTP1 Monoclonal Antibody; anti-GST3 antibody
Ordering
For Research Use Only!
Host
Rabbit
Reactivity
Human, Mouse, Rat
Clonality
Monoclonal
Isotype
IgG
Specificity
No cross reactivity with other proteins.
Purity/Purification
Affinity-Chromatography
Form/Format
Liquid; phosphate buffered saline, pH 7.4, 150mM NaCl, 0.02% sodium azide and 50% glycerol, 0.4-0.5mg/ml BSA
Sequence Length
210
Applicable Applications for anti-GST3 antibody
Immunocytochemistry (ICC), Immunofluorescence (IF), Immunohistochemistry (IHC), Western Blot (WB)
Application Notes
Dilute the sample so that the expected range of concentrations fall within the detection range of this kit.
If the expected range of concentration is unknown, a pilot test should be conducted to decide the optimal dilution ratio for your samples.
Some PubMed article(s) citing the expression level of this target are as follows:
QC testing used:
WB 1:500~1:2000
IHC 1:50~1:200
ICC/IF 1:50~1:200
Immunogen
A synthesized peptide derived from human GST3/GST pi Conjugation of reduced glutathione to a wide number of exogenous and endogenous hydrophobic electrophiles.
Preparation and Storage
Store at -20°C for one year. For short term storage and frequent use, store at 4°C for up to one month. Avoid repeated freeze-thaw cycles.

WB (Western Blot)

(Figure 1. Western blot analysis of GSTP1 using anti-GSTP1 antibody (AAA19183).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-GSTP1 antigen affinity purified polyclonal antibody at 0.5 ug/mL overnight at 4°C, then washed with TBS-0.1% Tween 3 times with 5 minutes each and probed with a goat anti-Rabbit IgG IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for GSTP1.)

product-image-AAA19183_WB.jpg WB (Western Blot) (Figure 1. Western blot analysis of GSTP1 using anti-GSTP1 antibody (AAA19183).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-GSTP1 antigen affinity purified polyclonal antibody at 0.5 ug/mL overnight at 4°C, then washed with TBS-0.1% Tween 3 times with 5 minutes each and probed with a goat anti-Rabbit IgG IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for GSTP1.)
Related Product Information for anti-GST3 antibody
Anti-GST3 / GSTP1 Monoclonal Antibody catalog # MBS1751952. Tested in Immunofluorescence (IF), Immunohistochemistry (IHC), Immunocytochemistry (ICC), Western Blot (WB) applications. This antibody reacts with Human, Mouse, Rat.

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
UniProt Accession #
NCBI Official Full Name
glutathione S-transferase P
NCBI Official Synonym Full Names
glutathione S-transferase pi 1
NCBI Official Symbol
GSTP1
NCBI Official Synonym Symbols
PI; DFN7; GST3; GSTP; FAEES3; HEL-S-22
NCBI Protein Information
glutathione S-transferase P
UniProt Protein Name
Glutathione S-transferase P
UniProt Gene Name
GSTP1
UniProt Synonym Gene Names
FAEES3; GST3

Similar Products

Product Notes

The GST3 gstp1 (Catalog #AAA19183) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-GST3/GSTP1 Monoclonal Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's GST3/GSTP1 can be used in a range of immunoassay formats including, but not limited to, Immunocytochemistry (ICC), Immunofluorescence (IF), Immunohistochemistry (IHC), Western Blot (WB). Dilute the sample so that the expected range of concentrations fall within the detection range of this kit. If the expected range of concentration is unknown, a pilot test should be conducted to decide the optimal dilution ratio for your samples. Some PubMed article(s) citing the expression level of this target are as follows: QC testing used: WB 1:500~1:2000 IHC 1:50~1:200 ICC/IF 1:50~1:200. Researchers should empirically determine the suitability of the GST3 gstp1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "GST3/GSTP1, Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Submit a Question

Please complete the form below and a representative will contact you as soon as possible.

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.