Skip to main content
Call us at +1-800-604-9114 for more information about our products or contact us online Need help? +1-800-604-9114 or contact us
product-image-AAA26908_FCM6.jpg FCM (Flow Cytometry) (Flow cytometric analysis of Neuro2A cells (blue) and L-929 cells (green) using RIPK3 mouse Rabbit mAb. Rabbit IgG (H+L), F(ab')2 Fragment (Alexa Fluor® 488 Conjugate) was used as a secondary antibody.)

Rabbit anti-Mouse RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3) Monoclonal Antibody | anti-RIP3 antibody

RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3)[KO Validated]

Gene Names
Ripk3; Rip3; AW107945; 2610528K09Rik
Reactivity
Mouse
Applications
Flow Cytometry, Functional Assay, Immunofluorescence, Immunoprecipitation, Western Blot
Purity
Purified
Synonyms
RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3), Antibody; RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3)[KO Validated]; RIP3; anti-RIP3 antibody
Ordering
For Research Use Only!
Host
Rabbit
Reactivity
Mouse
Clonality
Monoclonal
Isotype
IgG
Clone Number
D4G2A
Specificity
Recognizes endogenous levels of total mouse RIP3.
Purity/Purification
Purified
Form/Format
Supplied as a liquid in 10mM sodium HEPES, pH 7.5, 150mM sodium chloride, 0.1mg/ml BSA, <0.02% sodium azide, 50% glycerol.
Applicable Applications for anti-RIP3 antibody
Flow Cytometry (FC/FACS), Immunochemistry (IC), Immunofluorescence (IF), Immunoprecipitation (IP), Western Blot (WB), Knockout (KO) Validated
Application Notes
Immunofluorescence (IF-IC): 1:800
Flow Cytometry: 1:200
Western Blot: 1:1000, incubate membrane with diluted primary antibody in 5% BSA, 1X TBS, 0.1% Tween-20 at 4 degree C with gentle shaking, overnight.
Immunoprecipitation: 1:100
Immunogen
Synthetic peptide corresponding to residues surrounding Val370 of mouse RIP3.
Preparation and Storage
May be stored at 4 degree C for short-term only. Aliquot to avoid repeated freezing and thawing. Store at -20 degree C. Aliquots are stable for 12 months after receipt. For maximum recovery of product, centrifuge the original vial after thawing and prior to removing the cap.

FCM (Flow Cytometry)

(Flow cytometric analysis of Neuro2A cells (blue) and L-929 cells (green) using RIPK3 mouse Rabbit mAb. Rabbit IgG (H+L), F(ab')2 Fragment (Alexa Fluor® 488 Conjugate) was used as a secondary antibody.)

product-image-AAA26908_FCM6.jpg FCM (Flow Cytometry) (Flow cytometric analysis of Neuro2A cells (blue) and L-929 cells (green) using RIPK3 mouse Rabbit mAb. Rabbit IgG (H+L), F(ab')2 Fragment (Alexa Fluor® 488 Conjugate) was used as a secondary antibody.)

IF (Immunofluorescence)

(Confocal immunofluorescent analysis of L-929 (left) and Neuro-2a (right) cells using AAA26908 (green). Blue pseudocolor = DRAQ5® (fluorescent DNA dye).)

product-image-AAA26908_IF5.jpg IF (Immunofluorescence) (Confocal immunofluorescent analysis of L-929 (left) and Neuro-2a (right) cells using AAA26908 (green). Blue pseudocolor = DRAQ5® (fluorescent DNA dye).)

WB (Western Blot)

(Immunoprecipitation of RIP3 from L-929 cell extracts. Lane 1 is 10% input, lane 2 is Rabbit mAb IgG Isotype Control, and lane 3 is AAA26908. Western Blot analysis was performed using AAA26908. A conformation-specific secondary antibody was used to avoid cross reactivity with IgG.)

product-image-AAA26908_WB4.jpg WB (Western Blot) (Immunoprecipitation of RIP3 from L-929 cell extracts. Lane 1 is 10% input, lane 2 is Rabbit mAb IgG Isotype Control, and lane 3 is AAA26908. Western Blot analysis was performed using AAA26908. A conformation-specific secondary antibody was used to avoid cross reactivity with IgG.)

WB (Western Blot)

(Western Blot analysis of extracts from wild-type (+) or RIP3 knockout (-) mouse spleen using AAA26908 (upper) or beta-Actin Rabbit mAb (lower). Data were kindly provided by Dr. Junying Yuan, Harvard Medical School, Boston MA.)

product-image-AAA26908_WB3.jpg WB (Western Blot) (Western Blot analysis of extracts from wild-type (+) or RIP3 knockout (-) mouse spleen using AAA26908 (upper) or beta-Actin Rabbit mAb (lower). Data were kindly provided by Dr. Junying Yuan, Harvard Medical School, Boston MA.)

WB (Western Blot)

(Western Blot analysis of extracts from various cell lines using AAA26908 (upper) or B-Actin Rabbit mAb (lower).)

product-image-AAA26908_WB2.jpg WB (Western Blot) (Western Blot analysis of extracts from various cell lines using AAA26908 (upper) or B-Actin Rabbit mAb (lower).)

WB (Western Blot)

(Western Blot analysis of extracts from 293T cells, mock transfected (-) or transfected with a construct expressing full-length mouse RIP3 (mRIP3; +) using AAA26908.)

product-image-AAA26908_WB.jpg WB (Western Blot) (Western Blot analysis of extracts from 293T cells, mock transfected (-) or transfected with a construct expressing full-length mouse RIP3 (mRIP3; +) using AAA26908.)
Related Product Information for anti-RIP3 antibody
The receptor-interacting protein (RIP) family of serine-threonine kinases (RIP, RIP2, RIP3, and RIP4) are important regulators of cellular stress that trigger pro-survival and inflammatory responses through the activation of NF-kB, as well as pro-apoptotic pathways. In addition to the kinase domain, RIP contains a death domain responsible for interaction with the death domain receptor Fas and recruitment to TNF-R1 through interaction with TRADD. RIP-deficient cells show a failure in TNF-mediated NF-gammaB activation, making the cells more sensitive to apoptosis. RIP also interacts with TNF- receptor-associated factors (TRAFs) and can recruit IKKs to the TNF-R1 signaling complex via interaction with NEMO, leading to IgB phosphorylation and degradation. Overexpression of RIP induces both NF-gB activation and apoptosis. Caspase-8-dependent cleavage of the RIP death domain can trigger the apoptotic activity of RIP.||Receptor-interacting protein 3 (RIP3) was originally found to interact with RIP and the TNF receptor complex to induce apoptosis and activation of NF-kB. It has subsequently been shown that the association between RIP and RIP3 is a key component of a signaling pathway that results in programmed necrosis (necroptosis), a necrotic-like cell death induced by TNF in the presence of caspase inhibitors. RIP3 is phosphorylated at Ser227 and targets the phosphorylation
Product Categories/Family for anti-RIP3 antibody

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
UniProt Accession #
NCBI Official Full Name
receptor interacting protein 3
NCBI Official Synonym Full Names
receptor-interacting serine-threonine kinase 3
NCBI Official Symbol
Ripk3
NCBI Official Synonym Symbols
Rip3; AW107945; 2610528K09Rik
NCBI Protein Information
receptor-interacting serine/threonine-protein kinase 3; RIP-3; mRIP3; RIP-like protein kinase 3; receptor interacting protein 3; receptor-interacting protein 3
UniProt Protein Name
Receptor-interacting serine/threonine-protein kinase 3
UniProt Gene Name
Ripk3
UniProt Synonym Gene Names
Rip3; RIP-3; mRIP3
UniProt Entry Name
RIPK3_MOUSE

Similar Products

Product Notes

The RIP3 ripk3 (Catalog #AAA26908) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3)[KO Validated] reacts with Mouse and may cross-react with other species as described in the data sheet. AAA Biotech's RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3) can be used in a range of immunoassay formats including, but not limited to, Flow Cytometry (FC/FACS), Immunochemistry (IC), Immunofluorescence (IF), Immunoprecipitation (IP), Western Blot (WB), Knockout (KO) Validated. Immunofluorescence (IF-IC): 1:800 Flow Cytometry: 1:200 Western Blot: 1:1000, incubate membrane with diluted primary antibody in 5% BSA, 1X TBS, 0.1% Tween-20 at 4 degree C with gentle shaking, overnight. Immunoprecipitation: 1:100. Researchers should empirically determine the suitability of the RIP3 ripk3 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "RIP3 (RIPK3, Receptor-interacting Serine/Threonine-protein Kinase 3, RIP-like Protein Kinase 3, Receptor-interacting Protein 3, RIP-3), Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Submit a Question

Please complete the form below and a representative will contact you as soon as possible.

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.