Loading...

Skip to main content
Call us at +1-800-604-9114 for more information about our products or contact us online Need help? +1-800-604-9114 or contact us
product-image-AAA127419_FCM13.png FCM/FACS (Flow Cytometry) (Figure 2. Flow Cytometry analysis of RT4 cells using anti-POLR1C antibody (AAA127419).Overlay histogram showing RT4 cells stained with AAA127419 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-POLR1C Antibody (AAA127419, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

Rabbit anti-Human POLR1C Polyclonal Antibody | anti-POLR1C antibody

Anti-POLR1C Antibody Picoband

Gene Names
POLR1C; RPA5; TCS3; RPA39; RPA40; RPAC1; RP3-337H4.4
Reactivity
Human
Applications
ELISA, Flow Cytometry, Functional Assay, Western Blot
Purity
Immunogen affinity purified.
Synonyms
POLR1C, Antibody; Anti-POLR1C Antibody Picoband; forkhead box K1; Forkhead box protein F1; Forkhead-related activator 1; FREAC-1; Forkhead-related protein FKHL5; Forkhead-related transcription factor 1; FOXF1; FKHL5; FREAC1; anti-POLR1C antibody
Ordering
Host
Rabbit
Reactivity
Human
Clonality
Polyclonal
Isotype
Rabbit IgG
Specificity
Expressed in kidney.
Purity/Purification
Immunogen affinity purified.
Form/Format
Lyophilized. Each vial contains 4 mg Trehalose, 0.9 mg NaCl, 0.2 mg Na2HPO4.
Applicable Applications for anti-POLR1C antibody
ELISA, FCM/FACS (Flow Cytometry), WB (Western Blot)
Immunogen
E coli-derived human POLR1C recombinant protein (Position: K47-D346).
Subcellular Localization
Nucleus
Reconstitution
Adding 0.2 ml of distilled water will yield a concentration of 500ug/ml.
Cross Reactivity
No cross-reactivity with other proteins.
Protein Function
Transcriptional regulator involved in different processes such as glucose metabolism, aerobic glycolysis, muscle cell differentiation and autophagy. Recognizes and binds the forkhead DNA sequence motif (5'-GTAAACA-3') and can both act as a transcription activator or repressor, depending on the context. Together with FOXK2, acts as a key regulator of metabolic reprogramming towards aerobic glycolysis, a process in which glucose is converted to lactate in the presence of oxygen. Acts by promoting expression of enzymes for glycolysis (such as hexokinase-2 (HK2), phosphofructokinase, pyruvate kinase (PKLR) and lactate dehydrogenase), while suppressing further oxidation of pyruvate in the mitochondria by up-regulating pyruvate dehydrogenase kinases PDK1 and PDK4. Probably plays a role in gluconeogenesis during overnight fasting, when lactate from white adipose tissue and muscle is the main substrate. Involved in mTORC1-mediated metabolic reprogramming: in response to mTORC1 signaling, translocates into the nucleus and regulates the expression of genes associated with glycolysis and downstream anabolic pathways, such as HIF1A, thereby regulating glucose metabolism. Together with FOXK2, acts as a negative regulator of autophagy in skeletal muscle: in response to starvation, enters the nucleus, binds the promoters of autophagy genes and represses their expression, preventing proteolysis of skeletal muscle proteins. Acts as a transcriptional regulator of the myogenic progenitor cell population in skeletal muscle. Binds to the upstream enhancer region (CCAC box) of myoglobin (MB) gene, regulating the myogenic progenitor cell population. Promotes muscle progenitor cell proliferation by repressing the transcriptional activity of FOXO4, thereby inhibiting myogenic differentiation. Involved in remodeling processes of adult muscles that occur in response to physiological stimuli. Required to correct temporal orchestration of molecular and cellular events necessary for muscle repair. Represses myogenic differentiation by inhibiting MEFC activity. Positively regulates Wnt/beta-catenin signaling by translocating DVL into the nucleus. Reduces virus replication, probably by binding the interferon stimulated response element (ISRE) to promote antiviral gene expression.
Preparation and Storage
At -20 degree C for one year from date of receipt. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for six months.Avoid repeated freezing and thawing.

FCM/FACS (Flow Cytometry)

(Figure 2. Flow Cytometry analysis of RT4 cells using anti-POLR1C antibody (AAA127419).Overlay histogram showing RT4 cells stained with AAA127419 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-POLR1C Antibody (AAA127419, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

product-image-AAA127419_FCM13.png FCM/FACS (Flow Cytometry) (Figure 2. Flow Cytometry analysis of RT4 cells using anti-POLR1C antibody (AAA127419).Overlay histogram showing RT4 cells stained with AAA127419 (Blue line). To facilitate intracellular staining, cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-POLR1C Antibody (AAA127419, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

WB (Western Blot)

(Figure 1. Western blot analysis of POLR1C using anti-POLR1C antibody (AAA127419).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human 293T whole cell lysates,Lane 2: human K562 whole cell lysates,Lane 3: human HepG2 whole cell lysates,Lane 4: human RT4 whole cell lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-POLR1C antigen affinity purified polyclonal antibody (#AAA127419) at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for POLR1C at approximately 40 kDa. The expected band size for POLR1C is at 40 kDa.)

product-image-AAA127419_WB15.jpg WB (Western Blot) (Figure 1. Western blot analysis of POLR1C using anti-POLR1C antibody (AAA127419).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human 293T whole cell lysates,Lane 2: human K562 whole cell lysates,Lane 3: human HepG2 whole cell lysates,Lane 4: human RT4 whole cell lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-POLR1C antigen affinity purified polyclonal antibody (#AAA127419) at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for POLR1C at approximately 40 kDa. The expected band size for POLR1C is at 40 kDa.)
Related Product Information for anti-POLR1C antibody
The brand Picoband indicates this is a premium antibody that guarantees superior quality, high affinity, and strong signals with minimal background in Western blot applications. Only our best-performing antibodies are designated as Picoband, ensuring unmatched performance.
Product Categories/Family for anti-POLR1C antibody
References
1. Dauwerse, J. G., Dixon, J., Seland, S., Ruivenkamp, C. A. L., van Haeringen, A., Hoefsloot, L. H., Peters, D. J. M., Clement-de Boers, A., Daumer-Haas, C., Maiwald, R., Zweier, C., Kerr, B., Cobo, A. M., Toral, J. F., Hoogeboom, A. J. M., Lohmann, D. R., Hehr, U., Dixon, M. J., Breuning, M. H., Wieczorek, D. Mutations in gene encoding subunits of RNA polymerases I and III cause Treacher Collins syndrome. Nature Genet. 43: 20-22, 2011. 2. Hu, P., Wu, S., Sun, Y., Yuan, C.-C., Kobayashi, R., Myers, M. P., Hernandez, N. Characterization of human RNA polymerase III identifies orthologues for Saccharomyces cerevisiae RNA polymerase III subunits. Molec. Cell. Biol. 22: 8044-8055, 2002. 3. Mao, M., Fu, G., Wu, J.-S., Zhang, Q.-H., Zhou, J., Kan, L.-X., Huang, Q.-H., He, K.-L., Gu, B.-W., Han, Z.-G., Shen, Y., Gu, J., Yu, Y.-P., Xu, S.-H., Wang, Y.-X., Chen, S.-J., Chen, Z. Identification of genes expressed in human CD34+ hematopoietic stem/progenitor cells by expressed sequence tags and efficient full-length cDNA cloning. Proc. Nat. Acad. Sci. 95: 8175-8180, 1998.

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
UniProt Accession #
Molecular Weight
39,250 Da
NCBI Official Full Name
DNA-directed RNA polymerases I and III subunit RPAC1
NCBI Official Synonym Full Names
polymerase (RNA) I polypeptide C, 30kDa
NCBI Official Symbol
POLR1C
NCBI Official Synonym Symbols
RPA5; TCS3; RPA39; RPA40; RPAC1; RP3-337H4.4
NCBI Protein Information
DNA-directed RNA polymerases I and III subunit RPAC1; AC40; RPC40; RNA polymerases I and III subunit AC1; DNA-directed RNA polymerase I subunit C; DNA-directed RNA polymerases I and III 40 kDa polypeptide
UniProt Protein Name
DNA-directed RNA polymerases I and III subunit RPAC1
UniProt Gene Name
POLR1C
UniProt Synonym Gene Names
POLR1E; DNA-directed RNA polymerase I subunit C; RNA polymerases I and III subunit AC1; RPA40
UniProt Entry Name
RPAC1_HUMAN

Similar Products

Product Notes

The POLR1C polr1c (Catalog #AAA127419) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-POLR1C Antibody Picoband reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's POLR1C can be used in a range of immunoassay formats including, but not limited to, ELISA, FCM/FACS (Flow Cytometry), WB (Western Blot). Researchers should empirically determine the suitability of the POLR1C polr1c for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "POLR1C, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Submit a Question

Please complete the form below and a representative will contact you as soon as possible.

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.