Mouse anti-Human ITGB2 / MAC-1 / CD18 Monoclonal Antibody | anti-ITGB2 antibody
Mouse Monoclonal [clone MEM-48] (IgG1) to Human ITGB2 / MAC-1 / CD18
Gene Names
ITGB2; LAD; CD18; MF17; MFI7; LCAMB; LFA-1; MAC-1
Reactivity
Human
Applications
Immunohistochemistry, Western Blot, Immunoprecipitation, Flow Cytometry, Functional Assay
Purity
Purified by Protein A affinity chromatography.>95% by SDS-PAGE.
Synonyms
ITGB2 / MAC-1 / CD18, Antibody; Mouse Monoclonal [clone MEM-48] (IgG1) to Human ITGB2 / MAC-1 / CD18; Anti-ITGB2 / MAC-1 / CD18 Antibody (clone MEM-48) IHC-plus; ITGB2; CD18 antigen; CD18; Integrin beta chain; beta 2; LCAMB; MAC-1; MFI7; MF17; Integrin beta-2; LAD; LFA-1; Human ITGB2; anti-ITGB2 antibody
Host
Mouse
Reactivity
Human
Clonality
Monoclonal
Isotype
IgG1
Clone Number
MEM-48
Specificity
The antibody MEM-48 recognizes an epitope involving residues 534-546 in cysteine-rich repeat 3 of the CD18 antigen (integrin beta2 subunit; beta2 integrin). CD18 is a 90-95 kDa type I transmembrane protein expressed on all leukocytes.
Purity/Purification
Purified by Protein A affinity chromatography.
>95% by SDS-PAGE.
>95% by SDS-PAGE.
Form/Format
PBS, 15 mM sodium azide, pH 7.4.
Concentration
1 mg/ml (varies by lot)
Sequence Length
769
Applicable Applications for anti-ITGB2 antibody
Immunohistochemistry (IHC - Paraffin; IHC - Frozen), Western Blot (WB), Immunoprecipitation (IP), Flow Cytometry (FC), Functional Assay
Application Notes
IHC-p: 10 ug/ml
WB: 2 ug/ml
IP: 2 ug/ml
FC: 2 ug/ml
Optimal dilutions/concentrations should be determined by the end user
WB: 2 ug/ml
IP: 2 ug/ml
FC: 2 ug/ml
Optimal dilutions/concentrations should be determined by the end user
Immunogen
Raised against Leukocytes of a patient suffering from a LGL-type leukemia
Target Species
Human
Immunogen Species
ITCB2/CD18 antibody was raised against human.
Family/Subfamily
Integrin/Not assigned-Integrin
Antigen Type
Cells
Non-Reactivity
Canine
Target
ITGB2/CD18
Disclaimer
Due to the highly specific nature of antibodies and antigens, we cannot predict or be held responsible with respect to how this antibody will behave in your systems. Researchers using this antibody should conduct optimization studies to achieve the most optimal result possible for their intended application.
Recommended Immunohistochemistry Protocol
The following protocol is a recommendation only, and AAA Biotech, Inc. makes no guarantee of the results:
Tissue Preparation:
Formalin fixation and embedding in paraffin wax.
Tissue Sectioning:
Make 4-um sections and place on pre-cleaned and charged microscope slides. Heat in a tissue-dryingoven for 45 minutes at 60 degree C.
Deparaffinization:
Wash dry slides in 3 changes of xylene - 5 minutes each @ RT
Rehydration:
Wash slides in 3 changes of 100% alcohol - 3 minutes each @ RT
Wash slides in 2 changes of 95% alcohol - 3 minutes each @ RT
Wash slides in 1 change of 80% alcohol - 3 minutes @ RT
Rinse slides in gentle running distilled water - 5 minutes @ RT
Antigen retrieval:
Steam slides in 0.01 M sodium citrate buffer, pH 6.0 at 99-100 degree C - 20 minutes
Remove from heat and let stand at room temperature in buffer - 20 minutes
Rinse in 1X TBS with Tween (TBST) -1 minute @ RT
Immunostaining:
(Do not allow tissues to dry at any time during the staining procedure)
Apply a universal protein block - 20 minutes @ RT
Drain protein block from slides, apply diluted primary antibody - 45 minutes @ RT
Rinse slides in 1 X TBST - 1 minute @ RT
Apply a biotinylated secondary antibody appropriate for the primary antibody - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase streptavidin - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase chromogen substrate - 30 minutes @ RT
Wash slides in distilled water - 1 minute @ RT
Dehydrate:
(This method should only be used if the chromogen substrate is alcohol insoluble (e.g. Vector Red, DAB)
Wash slides in 2 changes of 80% alcohol - 1 minute each @ RT
Wash slides in 2 changes of 95% alcohol - 1 minute each @ RT
Wash slides in 3 changes of 100% alcohol - 1 minute each @ RT
Wash slides in 3 changes of xylene - 1 minute each @ RT
Apply coverslip
Tissue Preparation:
Formalin fixation and embedding in paraffin wax.
Tissue Sectioning:
Make 4-um sections and place on pre-cleaned and charged microscope slides. Heat in a tissue-dryingoven for 45 minutes at 60 degree C.
Deparaffinization:
Wash dry slides in 3 changes of xylene - 5 minutes each @ RT
Rehydration:
Wash slides in 3 changes of 100% alcohol - 3 minutes each @ RT
Wash slides in 2 changes of 95% alcohol - 3 minutes each @ RT
Wash slides in 1 change of 80% alcohol - 3 minutes @ RT
Rinse slides in gentle running distilled water - 5 minutes @ RT
Antigen retrieval:
Steam slides in 0.01 M sodium citrate buffer, pH 6.0 at 99-100 degree C - 20 minutes
Remove from heat and let stand at room temperature in buffer - 20 minutes
Rinse in 1X TBS with Tween (TBST) -1 minute @ RT
Immunostaining:
(Do not allow tissues to dry at any time during the staining procedure)
Apply a universal protein block - 20 minutes @ RT
Drain protein block from slides, apply diluted primary antibody - 45 minutes @ RT
Rinse slides in 1 X TBST - 1 minute @ RT
Apply a biotinylated secondary antibody appropriate for the primary antibody - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase streptavidin - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase chromogen substrate - 30 minutes @ RT
Wash slides in distilled water - 1 minute @ RT
Dehydrate:
(This method should only be used if the chromogen substrate is alcohol insoluble (e.g. Vector Red, DAB)
Wash slides in 2 changes of 80% alcohol - 1 minute each @ RT
Wash slides in 2 changes of 95% alcohol - 1 minute each @ RT
Wash slides in 3 changes of 100% alcohol - 1 minute each @ RT
Wash slides in 3 changes of xylene - 1 minute each @ RT
Apply coverslip
Preparation and Storage
Store at 2 degree C to 8 degree C. Do not freeze.
Product Categories/Family for anti-ITGB2 antibody
NCBI and Uniprot Product Information
NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
NCBI Official Full Name
integrin beta-2
NCBI Official Synonym Full Names
integrin, beta 2 (complement component 3 receptor 3 and 4 subunit)
NCBI Official Symbol
ITGB2
NCBI Official Synonym Symbols
LAD; CD18; MF17; MFI7; LCAMB; LFA-1; MAC-1
NCBI Protein Information
integrin beta-2; integrin beta chain, beta 2; complement receptor C3 beta-subunit; leukocyte cell adhesion molecule CD18; leukocyte-associated antigens CD18/11A, CD18/11B, CD18/11C; cell surface adhesion glycoprotein (LFA-1/CR3/P150,959 beta subunit precursor)
UniProt Protein Name
Integrin beta-2
UniProt Gene Name
ITGB2
UniProt Synonym Gene Names
CD18; MFI7
UniProt Entry Name
ITB2_HUMAN
Similar Products
Product Notes
The ITGB2 itgb2 (Catalog #AAA12341) is an Antibody produced from Mouse and is intended for research purposes only. The product is available for immediate purchase. The Mouse Monoclonal [clone MEM-48] (IgG1) to Human ITGB2 / MAC-1 / CD18 reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's ITGB2 / MAC-1 / CD18 can be used in a range of immunoassay formats including, but not limited to, Immunohistochemistry (IHC - Paraffin; IHC - Frozen), Western Blot (WB), Immunoprecipitation (IP), Flow Cytometry (FC), Functional Assay. IHC-p: 10 ug/ml WB: 2 ug/ml IP: 2 ug/ml FC: 2 ug/ml Optimal dilutions/concentrations should be determined by the end user. Researchers should empirically determine the suitability of the ITGB2 itgb2 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "ITGB2 / MAC-1 / CD18, Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.