Loading...

Skip to main content
Call us at +1-800-604-9114 for more information about our products or contact us online Need help? +1-800-604-9114 or contact us
product-image-AAA126013_FCM13.jpg FCM/FACS (Flow Cytometry) (Figure 2. Flow Cytometry analysis of PC-3 cells using anti-GRB2 antibody (AAA126013).Overlay histogram showing PC-3 cells stained with AAA126013 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-GRB2 Antibody (AAA126013, 1 ug/1x10^6 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1 ug/1x10^6) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

Rabbit anti-Human GRB2 Polyclonal Antibody | anti-GRB2 antibody

Anti-GRB2 Antibody Picoband

Gene Names
GRB2; ASH; Grb3-3; MST084; NCKAP2; MSTP084; EGFRBP-GRB2
Reactivity
Human
Applications
ELISA, Flow Cytometry, Functional Assay, Western Blot
Purity
Immunogen affinity purified.
Synonyms
GRB2, Antibody; Anti-GRB2 Antibody Picoband; anti-GRB2 antibody
Ordering
Host
Rabbit
Reactivity
Human
Clonality
Polyclonal
Isotype
Rabbit IgG
Purity/Purification
Immunogen affinity purified.
Form/Format
Lyophilized
Each vial contains 4 mg Trehalose, 0.9 mg NaCl, 0.2 mg Na2HPO4.
Concentration
Adding 0.2 ml of distilled water will yield a concentration of 500 ug/ml. (varies by lot)
Applicable Applications for anti-GRB2 antibody
ELISA, FCM/FACS (Flow Cytometry), WB (Western Blot)
Reconstitution
Adding 0.2 ml of distilled water will yield a concentration of 500 ug/ml.
Immunogen
E Coli-derived human GRB2 recombinant protein (Position: M1-V217).
Preparation and Storage
Store at -20 degree C for one year from date of receipt. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for six months. Avoid repeated freezing and thawing.

FCM/FACS (Flow Cytometry)

(Figure 2. Flow Cytometry analysis of PC-3 cells using anti-GRB2 antibody (AAA126013).Overlay histogram showing PC-3 cells stained with AAA126013 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-GRB2 Antibody (AAA126013, 1 ug/1x10^6 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1 ug/1x10^6) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

product-image-AAA126013_FCM13.jpg FCM/FACS (Flow Cytometry) (Figure 2. Flow Cytometry analysis of PC-3 cells using anti-GRB2 antibody (AAA126013).Overlay histogram showing PC-3 cells stained with AAA126013 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-GRB2 Antibody (AAA126013, 1 ug/1x10^6 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1 ug/1x10^6) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)

WB (Western Blot)

(Figure 1. Western blot analysis of GRB2 using anti-GRB2 antibody (AAA126013).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human 293T whole cell lysates,Lane 2: human THP-1 whole cell lysates,Lane 3: human HL-60 whole cell lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-GRB2 antigen affinity purified polyclonal antibody (#AAA126013) at 0.5 ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for GRB2 at approximately 25 kDa. The expected band size for GRB2 is at 25 kDa.)

product-image-AAA126013_WB15.jpg WB (Western Blot) (Figure 1. Western blot analysis of GRB2 using anti-GRB2 antibody (AAA126013).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.Lane 1: human 293T whole cell lysates,Lane 2: human THP-1 whole cell lysates,Lane 3: human HL-60 whole cell lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-GRB2 antigen affinity purified polyclonal antibody (#AAA126013) at 0.5 ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for GRB2 at approximately 25 kDa. The expected band size for GRB2 is at 25 kDa.)
Related Product Information for anti-GRB2 antibody
GRB2, Growth factor receptor-bound protein 2, is an adaptor protein involved in signal transduction/cell communication. The GRB2 gene encodes a protein that has homology to noncatalytic regions of the SRC oncogene product. Its two SH3 domains direct complex formation with proline-rich regions of other proteins, and its SH2 domain binds tyrosine phosphorylated sequences. In humans, the GRB2 protein is encoded by the GRB2 gene. Grb2 is widely expressed and is essential for multiple cellular functions. The protein encoded by this gene binds receptors such as the epidermal growth factor receptor and contains one SH2 domain and two SH3 domains. Its two SH3 domains direct complex formation with proline-rich regions of other proteins, and its SH2 domain binds tyrosine phosphorylated sequences. This gene is similar to the sem-5 gene of Caenorhabditis elegans, which is involved in the signal transduction pathway. Two alternatively spliced transcript variants encoding different isoforms have been found for this gene.
Product Categories/Family for anti-GRB2 antibody

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
UniProt Accession #
Molecular Weight
25,206 Da
NCBI Official Full Name
growth factor receptor-bound protein 2 isoform 1
NCBI Official Synonym Full Names
growth factor receptor-bound protein 2
NCBI Official Symbol
GRB2
NCBI Official Synonym Symbols
ASH; Grb3-3; MST084; NCKAP2; MSTP084; EGFRBP-GRB2
NCBI Protein Information
growth factor receptor-bound protein 2; HT027; protein Ash; SH2/SH3 adapter GRB2; abundant SRC homology; growth factor receptor-bound protein 3; epidermal growth factor receptor-binding protein GRB2
UniProt Protein Name
Growth factor receptor-bound protein 2
UniProt Gene Name
GRB2
UniProt Synonym Gene Names
ASH
UniProt Entry Name
GRB2_HUMAN

Similar Products

Product Notes

The GRB2 grb2 (Catalog #AAA126013) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-GRB2 Antibody Picoband reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's GRB2 can be used in a range of immunoassay formats including, but not limited to, ELISA, FCM/FACS (Flow Cytometry), WB (Western Blot). Researchers should empirically determine the suitability of the GRB2 grb2 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "GRB2, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Submit a Question

Please complete the form below and a representative will contact you as soon as possible.

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.