FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of U20S cells using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Overlay histogram showing U20S cells stained with AAA125737 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Kir6. 1/KCNJ8 Antibody (AAA125737, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
Rabbit Kir6. 1/KCNJ8 Polyclonal Antibody | anti-KCNJ8 antibody
Anti-Kir6. 1/KCNJ8 Antibody
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of U20S cells using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Overlay histogram showing U20S cells stained with AAA125737 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Kir6. 1/KCNJ8 Antibody (AAA125737, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of U20S cells using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Overlay histogram showing U20S cells stained with AAA125737 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Kir6. 1/KCNJ8 Antibody (AAA125737, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
IHC (Immunohiostchemistry)
(Figure 2. IHC analysis of Kir6. 1/KCNJ8 using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Kir6. 1/KCNJ8 was detected in paraffin-embedded section of human pancreatic cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-Kir6. 1/KCNJ8 Antibody (AAA125737) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.)
IHC (Immunohiostchemistry)
(Figure 2. IHC analysis of Kir6. 1/KCNJ8 using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Kir6. 1/KCNJ8 was detected in paraffin-embedded section of human pancreatic cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-Kir6. 1/KCNJ8 Antibody (AAA125737) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) with DAB as the chromogen.)
WB (Western Blot)
(Figure 1. Western blot analysis of Kir6. 1/KCNJ8 using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human CACO-2 whole cell lysatesLane 2: human SH-SY5Y whole cell lysatesLane 3: human HEK293 whole cell lysatesLane 4: human K562 whole cell lysatesLane 5: human A549 whole cell lysatesLane 6: rat RH35 whole cell lysatesLane 7: mouse kidney tissue lysatesLane 8: mouse HEPA1-6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Kir6. 1/KCNJ8 antigen affinity purified polyclonal antibody (Catalog # AAA125737) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for Kir6. 1/KCNJ8 at approximately 48KD. The expected band size for Kir6. 1/KCNJ8 is at 48KD.)
WB (Western Blot)
(Figure 1. Western blot analysis of Kir6. 1/KCNJ8 using anti-Kir6. 1/KCNJ8 antibody (AAA125737).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human CACO-2 whole cell lysatesLane 2: human SH-SY5Y whole cell lysatesLane 3: human HEK293 whole cell lysatesLane 4: human K562 whole cell lysatesLane 5: human A549 whole cell lysatesLane 6: rat RH35 whole cell lysatesLane 7: mouse kidney tissue lysatesLane 8: mouse HEPA1-6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Kir6. 1/KCNJ8 antigen affinity purified polyclonal antibody (Catalog # AAA125737) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for Kir6. 1/KCNJ8 at approximately 48KD. The expected band size for Kir6. 1/KCNJ8 is at 48KD.)
2. Beltrame, J. F., Sasayama, S., Maseri, A. Racial heterogeneity in coronary artery vasomotor reactivity: differences between Japanese and Caucasian patients. J. Am. Coll. Cardiol. 33: 1442-1452, 1999.
3. Brownstein, C. A., Towne, M. C., Luquette, L. J., Harris, D. J., Marinakis, N. S., Meinecke, P., Kutsche, K., Campeau, P. M., Yu, T. W., Margulies, D. M., Agrawal, P. B., Beggs, A. H. Mutation of KCNJ8 in a patient with Cantu syndrome with unique vascular abnormalities: support for the role of K(ATP) channels in this condition. Europ. J. Med. Genet. 56: 678-682, 2013.
NCBI and Uniprot Product Information
Similar Products
Product Notes
The KCNJ8 kcnj8 (Catalog #AAA125737) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-Kir6. 1/KCNJ8 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's Kir6. 1/KCNJ8 can be used in a range of immunoassay formats including, but not limited to, ELISA (Direct ELISA), FCM/FACS (Flow Cytometry), IHC (Immunohistochemistry), WB (Western Blot). Researchers should empirically determine the suitability of the KCNJ8 kcnj8 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Kir6. 1/KCNJ8, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.