FCM/FACS (Flow Cytometry)
(Figure 4. Flow Cytometry analysis of C6 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing C6 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
Rabbit Arp3/ACTR3 Polyclonal Antibody | anti-ACTR3 antibody
Anti-Arp3/ACTR3 Antibody
FCM/FACS (Flow Cytometry)
(Figure 4. Flow Cytometry analysis of C6 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing C6 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 4. Flow Cytometry analysis of C6 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing C6 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of ANA-1 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing ANA-1 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 3. Flow Cytometry analysis of ANA-1 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing ANA-1 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 2. Flow Cytometry analysis of A431 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing A431 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
FCM/FACS (Flow Cytometry)
(Figure 2. Flow Cytometry analysis of A431 cells using anti-Arp3/ACTR3 antibody (AAA125693).Overlay histogram showing A431 cells stained with AAA125693 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Arp3/ACTR3 Antibody (AAA125693,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
WB (Western Blot)
(Figure 1. Western blot analysis of Arp3/ACTR3 using anti-Arp3/ACTR3 antibody (AAA125693).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human A549 whole cell lysatesLane 2: human PC-3 whole lysatesLane 3: human U20S wholel cell lysatesLane 4: rat kidney tissue lysatesLane 5: rat spleen tissue lysatesLane 6: mose spleen tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Arp3/ACTR3 antigen affinity purified polyclonal antibody (Catalog # AAA125693) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for Arp3/ACTR3 at approximately 47KD. The expected band size for Arp3/ACTR3 is at 47KD.)
WB (Western Blot)
(Figure 1. Western blot analysis of Arp3/ACTR3 using anti-Arp3/ACTR3 antibody (AAA125693).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human A549 whole cell lysatesLane 2: human PC-3 whole lysatesLane 3: human U20S wholel cell lysatesLane 4: rat kidney tissue lysatesLane 5: rat spleen tissue lysatesLane 6: mose spleen tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Arp3/ACTR3 antigen affinity purified polyclonal antibody (Catalog # AAA125693) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for Arp3/ACTR3 at approximately 47KD. The expected band size for Arp3/ACTR3 is at 47KD.)
2. Machesky, L. M., Reeves, E., Wientjes, F., Mattheyse, F. J., Grogan, A., Totty, N. F., Burlingame, A. L., Hsuan, J. J., Segal, A. W. Mammalian actin-related protein 2/3 complex localizes to regions of lamellipodial protrusion and is composed of evolutionarily conserved proteins. Biochem. J. 328: 105-112, 1997.
3. Robinson, R. C., Turbedsky, K., Kaiser, D. A., Marchand, J. -B., Higgs, H. N., Choe, S., Pollard, T. D. Crystal structure of Arp2/3 complex. Science 294: 1679-1684, 2001.
NCBI and Uniprot Product Information
Similar Products
Product Notes
The ACTR3 actr3 (Catalog #AAA125693) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-Arp3/ACTR3 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's Arp3/ACTR3 can be used in a range of immunoassay formats including, but not limited to, ELISA (Direct ELISA), FCM/FACS (Flow Cytometry), WB (Western Blot). Researchers should empirically determine the suitability of the ACTR3 actr3 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Arp3/ACTR3, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.