IP (Immunoprecipitation)
(Figure 7. Immunoprecipitating IDH3B in U251 whole cell lysate.Western blot analysis of IDH3B using anti-IDH3B antibody (AAA19926).Lane 1: U251 whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-IDH3B antibody in U251 whole cell lysate.Lane 3: anti-IDH3B antibody (2ug) + U251 whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-IDH3B antigen affinity purified polyclonal antibody (AAA19926) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody ( cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-IDH3B Antibody (AAA19926, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
Rabbit IDH3B Polyclonal Antibody | anti-IDH3B antibody
Anti-IDH3B Antibody Picoband
IHC: 2-5ug/ml, Human
FC/FACS (Fixed): 1-3ug/1x106 cells, Human
IP: 0.5-2ug/ml, Human
ELISA: 0.1-0.5ug/ml
IP (Immunoprecipitation)
(Figure 7. Immunoprecipitating IDH3B in U251 whole cell lysate.Western blot analysis of IDH3B using anti-IDH3B antibody (AAA19926).Lane 1: U251 whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-IDH3B antibody in U251 whole cell lysate.Lane 3: anti-IDH3B antibody (2ug) + U251 whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-IDH3B antigen affinity purified polyclonal antibody (AAA19926) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody ( cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-IDH3B Antibody (AAA19926, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
IP (Immunoprecipitation)
(Figure 7. Immunoprecipitating IDH3B in U251 whole cell lysate.Western blot analysis of IDH3B using anti-IDH3B antibody (AAA19926).Lane 1: U251 whole cell lysates (30ug)Lane 2: Rabbit control IgG instead of anti-IDH3B antibody in U251 whole cell lysate.Lane 3: anti-IDH3B antibody (2ug) + U251 whole cell lysate (500ug)After electrophoresis, proteins were transferred to a membrane. Then the membrane was incubated with rabbit anti-IDH3B antigen affinity purified polyclonal antibody (AAA19926) at a dilution of 0.5ug/mL and probed with a goat anti-rabbit IgG-HRP secondary antibody ( cells were fixed with 4% paraformaldehyde and permeabilized with permeabilization buffer. The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-IDH3B Antibody (AAA19926, 1ug/1x106 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control.)
IHC (Immunohistochemistry)
(Figure 5. IHC analysis of IDH3B using anti-IDH3B antibody (AAA19926).IDH3B was detected in a paraffin-embedded section of follicles of human thyroid cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH 8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit (Lane 2: human Jurkat whole cell lysates,Lane 3: human RT4 whole cell lysates,Lane 4: human U251 whole cell lysates,Lane 5: rat brain tissue lysates,Lane 6: rat heart tissue lysates,Lane 7: mouse brain tissue lysates,Lane 8: mouse heart tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-IDH3B antigen affinity purified polyclonal antibody (#AAA19926) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for IDH3B at approximately 42 kDa. The expected band size for IDH3B is at 42 kDa.)
IHC (Immunohistochemistry)
(Figure 5. IHC analysis of IDH3B using anti-IDH3B antibody (AAA19926).IDH3B was detected in a paraffin-embedded section of follicles of human thyroid cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH 8.0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit ( epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2ug/ml rabbit anti-IDH3B Antibody (AAA19926) overnight at 4 degree C. Peroxidase Conjugated Goat Anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using HRP Conjugated Rabbit IgG Super Vision Assay Kit (Lane 2: human Jurkat whole cell lysates,Lane 3: human RT4 whole cell lysates,Lane 4: human U251 whole cell lysates,Lane 5: rat brain tissue lysates,Lane 6: rat heart tissue lysates,Lane 7: mouse brain tissue lysates,Lane 8: mouse heart tissue lysates.After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-IDH3B antigen affinity purified polyclonal antibody (#AAA19926) at 0.25ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for IDH3B at approximately 42 kDa. The expected band size for IDH3B is at 42 kDa.)
NCBI and Uniprot Product Information
Similar Products
Product Notes
The IDH3B idh3b (Catalog #AAA19926) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-IDH3B Antibody Picoband reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's IDH3B can be used in a range of immunoassay formats including, but not limited to, ELISA (EIA), Flow Cytometry (FC/FACS), Immunoprecipitation (IP), Immunohistochemistry (IHC), Western Blot (WB). WB: 0.1-0.25ug/ml, Human, Mouse, Rat IHC: 2-5ug/ml, Human FC/FACS (Fixed): 1-3ug/1x106 cells, Human IP: 0.5-2ug/ml, Human ELISA: 0.1-0.5ug/ml. Researchers should empirically determine the suitability of the IDH3B idh3b for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "IDH3B, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
