Rabbit SLC7A5 / CD98 Polyclonal Antibody | anti-SLC7A5 antibody
Rabbit Polyclonal to Human SLC7A5 / CD98
Gene Names
SLC7A5; E16; CD98; LAT1; 4F2LC; MPE16; hLAT1; D16S469E
Reactivity
HumanPredicted Reactivity: Monkey
Applications
Immunohistochemistry
Purity
Immunoaffinity Purified
Synonyms
SLC7A5 / CD98, Antibody; Rabbit Polyclonal to Human SLC7A5 / CD98; Anti-SLC7A5 / CD98 Antibody (Internal) IHC-plus; SLC7A5; 4F2 LC; 4F2 light chain; 4F2LC; CD98; CD98 light chain; CD98LC; D16S469E; Integral membrane protein E16; Membrane protein E16; MPE16; LAT1; E16; HLAT1; TA1; Human SLC7A5; anti-SLC7A5 antibody
Host
Rabbit
Reactivity
Human
Predicted Reactivity: Monkey
Predicted Reactivity: Monkey
Clonality
Polyclonal
Specificity
Human SLC7A5. BLAST analysis of the peptide immunogen showed no homology with other human proteins.
Purity/Purification
Immunoaffinity Purified
Form/Format
PBS, 0.1% sodium azide.
Concentration
1 mg/ml (varies by lot)
Sequence Length
507
Applicable Applications for anti-SLC7A5 antibody
IHC (Immunohistochemistry)
Target
SLC7A5 / CD98 Light Chain
Family/Subfamily
Transporter / Cationic amino acid transporter
Epitope
Internal
Immunogen Species
Human
Immunogen
SLC7A5 / CD98 Light Chain antibody was raised against synthetic 15 amino acid peptide from internal region of human SLC7A5. Percent identity with other species by BLAST analysis: Human, Gibbon (100%); Gorilla, Monkey (93%); Mouse, Rat, Dog, Bat, Panda (80%).
Disclaimer
Due to the highly specific nature of antibodies and antigens, we cannot predict or be held responsible with respect to how this antibody will behave in your systems. Researchers using this antibody should conduct optimization studies to achieve the most optimal result possible for their intended application.
Recommended Immunohistochemistry Protocol
The following protocol is a recommendation only, and AAA Biotech makes no guarantee of the results:
Tissue Preparation:
Formalin fixation and embedding in paraffin wax.
Tissue Sectioning:
Make 4-um sections and place on pre-cleaned and charged microscope slides. Heat in a tissue-dryingoven for 45 minutes at 60°C.
Deparaffinization:
Wash dry slides in 3 changes of xylene - 5 minutes each @ RT
Rehydration:
Wash slides in 3 changes of 100% alcohol - 3 minutes each @ RT
Wash slides in 2 changes of 95% alcohol - 3 minutes each @ RT
Wash slides in 1 change of 80% alcohol - 3 minutes @ RT
Rinse slides in gentle running distilled water - 5 minutes @ RT
Antigen retrieval:
Steam slides in 0.01 M sodium citrate buffer, pH 6.0 at 99-100°C - 20 minutes
Remove from heat and let stand at room temperature in buffer - 20 minutes
Rinse in 1X TBS with Tween (TBST) -1 minute @ RT
Immunostaining:
(Do not allow tissues to dry at any time during the staining procedure)
Apply a universal protein block - 20 minutes @ RT
Drain protein block from slides, apply diluted primary antibody - 45 minutes @ RT
Rinse slides in 1 X TBST - 1 minute @ RT
Apply a biotinylated secondary antibody appropriate for the primary antibody - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase streptavidin - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase chromogen substrate - 30 minutes @ RT
Wash slides in distilled water - 1 minute @ RT
Dehydrate:
(This method should only be used if the chromogen substrate is alcohol insoluble (e.g. Vector Red, DAB)
Wash slides in 2 changes of 80% alcohol - 1 minute each @ RT
Wash slides in 2 changes of 95% alcohol - 1 minute each @ RT
Wash slides in 3 changes of 100% alcohol - 1 minute each @ RT
Wash slides in 3 changes of xylene - 1 minute each @ RT
Apply coverslip
Tissue Preparation:
Formalin fixation and embedding in paraffin wax.
Tissue Sectioning:
Make 4-um sections and place on pre-cleaned and charged microscope slides. Heat in a tissue-dryingoven for 45 minutes at 60°C.
Deparaffinization:
Wash dry slides in 3 changes of xylene - 5 minutes each @ RT
Rehydration:
Wash slides in 3 changes of 100% alcohol - 3 minutes each @ RT
Wash slides in 2 changes of 95% alcohol - 3 minutes each @ RT
Wash slides in 1 change of 80% alcohol - 3 minutes @ RT
Rinse slides in gentle running distilled water - 5 minutes @ RT
Antigen retrieval:
Steam slides in 0.01 M sodium citrate buffer, pH 6.0 at 99-100°C - 20 minutes
Remove from heat and let stand at room temperature in buffer - 20 minutes
Rinse in 1X TBS with Tween (TBST) -1 minute @ RT
Immunostaining:
(Do not allow tissues to dry at any time during the staining procedure)
Apply a universal protein block - 20 minutes @ RT
Drain protein block from slides, apply diluted primary antibody - 45 minutes @ RT
Rinse slides in 1 X TBST - 1 minute @ RT
Apply a biotinylated secondary antibody appropriate for the primary antibody - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase streptavidin - 30 minutes @ RT
Rinse slides in 1X TBST -1 minute @ RT
Apply alkaline phosphatase chromogen substrate - 30 minutes @ RT
Wash slides in distilled water - 1 minute @ RT
Dehydrate:
(This method should only be used if the chromogen substrate is alcohol insoluble (e.g. Vector Red, DAB)
Wash slides in 2 changes of 80% alcohol - 1 minute each @ RT
Wash slides in 2 changes of 95% alcohol - 1 minute each @ RT
Wash slides in 3 changes of 100% alcohol - 1 minute each @ RT
Wash slides in 3 changes of xylene - 1 minute each @ RT
Apply coverslip
Preparation and Storage
Aliquot and store undiluted at -20°C or below for up to 1 year. Can be stored undiluted at 4°C for up to 1 month. Avoid freeze-thaw cycles.
Related Product Information for anti-SLC7A5 antibody
Solute carrier family 7 member 5 (SLC7A5) is also known as large neutral amino acids transporter small subunit 1. It acts as an amino acid exchanger and is involved in the transport of L-DOPA across the blood-brain barrier, and that of thyroid hormones triiodothyronine (T3) and thyroxine (T4) across the cell membrane in tissues such as placenta. It plays a role in neuronal cell proliferation (neurogenesis) in brain and acts as the major transporter of tyrosine in fibroblasts.
Product Categories/Family for anti-SLC7A5 antibody
NCBI and Uniprot Product Information
NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
Molecular Weight
55,010 Da
NCBI Official Full Name
large neutral amino acids transporter small subunit 1
NCBI Official Synonym Full Names
solute carrier family 7 (amino acid transporter light chain, L system), member 5
NCBI Official Symbol
SLC7A5
NCBI Official Synonym Symbols
E16; CD98; LAT1; 4F2LC; MPE16; hLAT1; D16S469E
NCBI Protein Information
large neutral amino acids transporter small subunit 1; 4F2 LC; 4F2 light chain; CD98 light chain; integral membrane protein E16; L-type amino acid transporter 1; solute carrier family 7 member 5; large neutral amino acids transporter 1; y+ system cationic amino acid transporter; sodium-independent neutral amino acid transporter LAT1; solute carrier family 7 (cationic amino acid transporter, y+ system), member 5
UniProt Protein Name
Large neutral amino acids transporter small subunit 1
UniProt Gene Name
SLC7A5
UniProt Synonym Gene Names
CD98LC; LAT1; MPE16; 4F2 LC; 4F2LC; hLAT1
UniProt Entry Name
LAT1_HUMAN
Similar Products
Product Notes
The SLC7A5 slc7a5 (Catalog #AAA50665) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Rabbit Polyclonal to Human SLC7A5 / CD98 reacts with Human Predicted Reactivity: Monkey and may cross-react with other species as described in the data sheet. AAA Biotech's SLC7A5 / CD98 can be used in a range of immunoassay formats including, but not limited to, IHC (Immunohistochemistry). Researchers should empirically determine the suitability of the SLC7A5 slc7a5 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "SLC7A5 / CD98, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
